Emerson COPELAND SCROLL SZO22 Manual do Utilizador Página 22
- Página / 34
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
16 2008SSD-34 (5/11)
Single-Compressor Module Operation
3.1.2 Post-Startup Checklist
Perform these checks AFTER starting the Compressor Module:
DURING INITIAL OPERATION, PERFORM THESE CHECKS:
___ 1. Compressor Module builds pressure on initial startup; no unusual mechanical noise.
___ 2. Oil level is correct at minimum and maximum speeds.
___ 3. No gas leaks are present.
___ 4. No oil leaks are present.
___ 5. Oil cooler fan turn on and run at the appropriate temperature.
___ 6. Oil cooler fan speed varies with temperature.
___ 7. Compressor motor speed varies appropriately for the Packager conguration.
___ 8. Compressor continues to operate in bypass when the Compressor Module discharge is blocked.
___ 9. Compressor Module is leak tight (maintains approximately 30 psig or more when the Compressors are initially
turned off).
3.2 Initial Startup - Compressor Package
Refer to your Packager’s user manual for information on procedures to start up the Compressor Package,
which includes equipment added to the Compressor Module by the Packager.
3.3 Normal Operation Checklist
Observe the following conditions after startup—when power is applied to the VFD and the VFD receives
the signal from the Compressor Package control system to run:
CHECK FOR THESE CONDITIONS UNDER NORMAL OPERATION:
___ 1. Compressor speed should range from 2400 to 4800 rpm during normal operation.
___ 2. Suction pressure range is model specic.
___ 3. Discharge pressure should range from 70 psig to 190 psig, depending on the model
(see Compressor Module Nomenclature on page iv).
___ 4. Pressure differential between suction and discharge is at least 70 psi.
___ 5. First-stage separator temperature should be between 170°F and 220°F (77-104°C) model specic.
___ 6. Oil cooler fans should either run continuously or cycle periodically under normal conditions.
If any of these conditions are not met during normal operation, shut down the unit and refer to 5.0 -
Troubleshooting on page 22.
- Copeland Scroll 1
- Compressor Module 1
- TABLE OF CONTENTS 3
- ii 2008SSD-34 (5/11) 4
- iii 2008SSD-34 (5/11) 5
- 1 2008SSD-34 (5/11) 7
- iv 2008SSD-34 (5/11) 7
- SAFETY ALERT SYMBOL 8
- 1.0 iNtroduCtioN 9
- 1.2 The Compressor 10
- 1.3 The Compressor Package 10
- 2.0 iNstallatioN 11
- 6 2008SSD-34 (5/11) 12
- 8 2008SSD-34 (5/11) 14
- 2.6 Electrical Controls 15
- 2.6.2 Oil Cooler Fan Control 16
- Oil Cooler 17
- 1st-Stage Separator 17
- 2400 to 4800 rpm 18
- Figure 10 Motor Control 18
- Optional if mo re than one 19
- 2.6.5 Wiring 20
- 3.0 operatioN 21
- 3.1.2 Post-Startup Checklist 22
- 4.0 maiNteNaNCe 23
- 4.2 Maintenance Tools 24
- 4.3 Oil Service 25
- 20 2008SSD-34 (5/11) 26
- 5.0 troubleshootiNg 28
- 6.0 speCifiCatioNs 30
- 26 2008SSD-34 (5/11) 33
- 2008SSD-34-R2 34
Manuais e produtos relacionados com Amaciadores Emerson COPELAND SCROLL SZO22
(40 páginas)Radio Shack LK-1500 manuals
Owner’s manuals and user’s guides for Keyboards Radio Shack LK-1500.
We providing 2 pdf manuals Radio Shack LK-1500 for download free by document types: User Manual, Owner's Manual
Comentários a estes Manuais