Emerson FM-3 Manual de Instalação descarregar pdf (Página 111)

97

Programming

Subroutine for Jogging the Axis into the Desired Position (Program 1)

‘Allow jogging until either the “Learn” input (ModuleInput.1)

‘or the “Skip” input (ModuleInput.2) goes ON.

Do While ((ModuleInput.1=OFF) AND (ModuleInput.2=OFF))

If (ModuleInput.3=ON) Then ‘Jog+ if the Jog+ input is on

Jog.0.PlusInitiate ‘Vel=0.1in/s

Do While (ModuleInput.3=ON)

If (ModuleInput.5=ON) Then ‘ModuleInput.5 = “Jog Fast”

Jog.0.Vel = 1.0 ‘in/s

Else

Jog.0.Vel = 0.1 ‘in/s

Endif

Loop

Jog.Stop ‘Stop jogging when the Jog+ input goes off.

Endif

If (ModuleInput.4=ON) Then ‘Jog- if the Jog- input is on

Jog.0.MinusInitiate ‘Vel=0.1in/s

Do While (ModuleInput.4=ON)

If (ModuleInput.5=ON) Then ‘ModuleInput.5 = “Jog Fast”

Jog.0.Vel = 1.0 ‘in/s

Else

Jog.0.Vel = 0.1 ‘in/s

Endif

Loop

Jog.Stop ‘Stop jogging when the Jog+ input goes off.

Endif

Loop

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 229 230

Comentários a estes Manuais

Sem comentários