Emerson PMC-CGM Manual do Utilizador descarregar pdf (Página 36)

PMC-CGM Installation and Use (6806800D53C)

Access and Configuration Cabling

4.2.1 Cabling

To access the PMC-CGM, you have to attach an Ethernet cable to the ARTM-F103-STX as

shown in the following graphic.

It is mandatory that you connect port ETH7 with ETHA on the same ARTM-F103-STX and that

you cross-connect ETH8 with ETHB on the peer ARTM-F103-STX as indicated below.

4.2.2 Access

To access the module you can either use IPMI or a MIB browser.

For details on how to access the module via IPMI refer to the PMC-CGM: Control via IPMI

Programmer’s Reference.

When using a MIB browser, you have to specify the settings described in Using a MIB Browser

on page 37.

Figure 4-1 Connecting the ARTM-F103-STX Ethernet Ports

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 65 66

Sem comentários

Emerson PMC-CGM Manual do Utilizador Página 36