Emerson Fisher 1061 Manual de Instalação

www.Fisher.comFisherr 1061 Pneumatic Piston Rotary Actuatorwith Style H & J Mounting AdaptationsContentsIntroduction 1...

Instruction ManualD100325X0121061 H & J ActuatorOctober 201210Figure 4. Actuator Housing Construction Styles and Mounting PositionsDESIRED ACTION

Instruction ManualD100325X0121061 H & J ActuatorOctober 201211Pressure Connections1. If a positioner is used, the pressure connections to the actu

Instruction ManualD100325X0121061 H & J ActuatorOctober 2012123. Stroke the actuator until the left-hand threaded upper hex nut (key 71) can be re

Instruction ManualD100325X0121061 H & J ActuatorOctober 201213WARNINGAvoid personal injury or property damage from sudden release of process press

Instruction ManualD100325X0121061 H & J ActuatorOctober 2012146. For an actuator with an H mounting adaptation and a 22.2 through 38.1 mm (7/8 thr

Instruction ManualD100325X0121061 H & J ActuatorOctober 2012154. Apply lithium grease (key 93) to the inside wall of the cylinder, and then attach

Instruction ManualD100325X0121061 H & J ActuatorOctober 201216a. If no handwheel actuator is used, position the travel indicator (key 38) so that

Instruction ManualD100325X0121061 H & J ActuatorOctober 201217b. Rotate the actuator housing 180 degrees, maintaining the appropriate position (1,

Instruction ManualD100325X0121061 H & J ActuatorOctober 201218marked, heat the hex nut (key 14) to 177_C(350_F) long enough for the thread locking

Instruction ManualD100325X0121061 H & J ActuatorOctober 201219a. Position the travel indicator (key 38) accordingly. Replace the cover (key 34), a

Instruction ManualD100325X0121061 H & J ActuatorOctober 20122Table 1. SpecificationsAvailable ConfigurationDouble-acting pneumatic piston rotary a

Instruction ManualD100325X0121061 H & J ActuatorOctober 201220Key Description Part Number20 Seal Support Cylinder, aluminum21 Housing, cast iron22

Instruction ManualD100325X0121061 H & J ActuatorOctober 201221Figure 6. Fisher 1061 Actuator with Typical H and J Mounting Adaptations52A9796-G59A

Instruction ManualD100325X0121061 H & J ActuatorOctober 201222Figure 6. Fisher 1061 Actuator with Typical H and J Mounting Adaptations (Continued)

Instruction ManualD100325X0121061 H & J ActuatorOctober 201223Figure 7. H Mounting for 44.5 or 50.8 mm (1-3/4 or 2-Inch) Keyed Equipment Shafts39A

Instruction ManualD100325X0121061 H & J ActuatorOctober 201224Emerson Process ManagementMarshalltown, Iowa 50158 USASorocaba, 18087 BrazilChatham,

Instruction ManualD100325X0121061 H & J ActuatorOctober 20123SpecificationsSpecifications are shown in table 1 for 1061 actuators. Specifications

Instruction ManualD100325X0121061 H & J ActuatorOctober 20124Table 3. Acceptable Shaft Diameters and Torque Limits for Actuators with J MountingAC

Instruction ManualD100325X0121061 H & J ActuatorOctober 20125Align the appropriate keyway with the keyway in the operated equipment shaft. If usin

Instruction ManualD100325X0121061 H & J ActuatorOctober 20126Figure 2. Fisher 1061 Mounting DimensionsHORJMOUNTINGACTUATOR SIZE C E F H P Ymm30 17

Instruction ManualD100325X0121061 H & J ActuatorOctober 20127Figure 2. Fisher 1061 Mounting Dimensions (Continued)JMOUNTING(1)Actuator SizeS(Valve

Instruction ManualD100325X0121061 H & J ActuatorOctober 20128Figure 2. Fisher 1061 Mounting Dimensions (Continued)HMOUNTING(1)Actuator SizeS(Actua

Instruction ManualD100325X0121061 H & J ActuatorOctober 20129Figure 3. Center of Gravity DimensionsACTUATOR SIZECENTER OF GRAVITY DIMENSIONSX Ymm