Emerson BDS-256XL Guia do Utilizador descarregar pdf (Página 144)

Using the Report Generator

22-10

22.10. Discharge Report

String View > View|Reports|Discharge

To create a Discharge report, click Discharge. The Discharge Setup box appears. Options

selected on Discharge Setup are saved by the battery name.

Figure 105. Discharge Setup

Report Interval area - Click Time or OV (Overall Voltage) Deviation and type a value in

the respective box. Report Interval determines the frequency of report sampling. Specify time

in hours, minutes, and seconds (10 second minimum) or OV deviation in volts (0.2 volt

minimum).

Low Threshold Values area - Click Use Preset Thresholds to use values set in the BMDM

program when the test was run. Click Override Preset Thresholds to ignore BMDM

thresholds, then type values in the Low Cell Threshold and Low OV Threshold boxes. Any

measurement below these values will be in violation.

Graph Scaling area - Click Auto to default to automatic graph scaling, or click Manual and

type the Max and Min graph scale values. Use Manual scaling when you want to maintain

scaling to make it easier to compare several graphs.

Select Auto Select to automatically select cells listed on the right side that violate thresholds.

If you change cell or OV threshold values, cells that meet the new criteria are selected. You

may add cells to the report by selecting additional check boxes in the list.

Select String Memos and Cell Memos to include string memos and cell memos.

Select Include Power to list power in reports, in addition to voltage and current.

Select Standard to create a Standard report. Cells are listed by string, and strings are listed

by time in a Cell = Value format.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 204 205

Sem comentários

Emerson BDS-256XL Guia do Utilizador Página 144