Emerson 2468CD Manual do Utilizador Página 132

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 186
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 131
Remote Display Options 24683B, C & D Hydrastep 2468CB & 2468CD Manual
4-14 24685034
Indication Fault Analysis and Corrective Action
Bottom half of fault
LED illuminated and
odd LEDs flashing at
1Hz, or odd LEDs off.
Power present, but
loss of serial data.
Check that the wiring to connector PL1 in the remote
display unit is correct.
If wiring is correct, proceed as follows:
1. If a termination resistor is fitted, disconnect this from
the end of the daisy chain.
2. With an ac voltmeter, check the ac voltage between
pins 1and 5, and pins 2 and 5, on PL1.
3. An ac voltage is less than 1V indicates a fault on the
signal transmission lines. Check back to the previous
remote display in the daisy chain or to the 2468
electronics unit, as appropriate. If the correct ac
voltages are present at this location then a line break
is indicated.
4. If the ac voltages are still low then either the lines are
short-circuited or there is a board fault. Disconnect the
remote displays upstream and re-check the ac
voltages. If there is a voltage of less than 1Vac at the
2468 electronics unit (with PL3 removed) then the
display board is faulty. Remove this board and fit a
serviceable item.
Bottom half of fault
LED illuminated and
even LEDs flashing at
1Hz, or even LEDs off.
Power present, but
loss of serial data.
Check that the wiring to connector PL2 in the remote
display unit is correct.
If wiring is correct, proceed as follows:
1. If a termination resistor is fitted, disconnect this from
the end of the daisy chain.
2. With an ac voltmeter, check the ac voltage between
pins 1and 5, and pins 2 and 5, on PL2.
3. An ac voltage is less than 1V indicates a fault on the
signal transmission lines. Check back to the previous
remote display in the daisy chain or to the 2468
electronics unit, as appropriate. If the correct ac
voltages are present at this location then a line break
is indicated.
4. If the ac voltages are still low then either the lines are
short-circuited or there is a board fault. Disconnect the
remote displays upstream and re-check the ac
voltages. If there is a voltage of less than 1Vac at the
2468 electronics unit (with PL7 removed) then the
display board is faulty. Remove this board and fit a
serviceable item.
Table 4.1 (cont.) - Fault Analysis and Correction Chart
Vista de página 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 185 186

Comentários a estes Manuais

Sem comentários

Cisco 6400 manuály

Uživatelské manuály a uživatelské příručky pro Hardware Cisco 6400.
Poskytujeme 1 manuály pdf Cisco 6400 ke stažení zdarma podle typů dokumentů: Uživatelský manuál






Další produkty a příručky pro Hardware Cisco

Modely Typ Dokumentu
1-PORT G.SHDSL 2600 Uživatelský manuál   Cisco 1-PORT G.SHDSL 2600 User Manual, 22 stránky
WUSB300N Uživatelský manuál   Cisco WUSB300N User Manual, 39 stránky
WRT110 Uživatelský manuál   Cisco WRT110 User Manual, 48 stránky
10BASE-FL Uživatelský manuál   Cisco 10BASE-FL User Manual, 40 stránky
2900 SERIES XL Uživatelský manuál   Cisco 2900 SERIES XL User Manual, 138 stránky
WRTP54G Uživatelský manuál   Cisco WRTP54G User Manual, 114 stránky
15327 Uživatelský manuál   Cisco 15327 User Manual, 584 stránky
10720 Uživatelský manuál   Cisco 10720 User Manual, 26 stránky
10700 Uživatelský manuál   Cisco 10700 User Manual, 16 stránky
XR 12000 Series Uživatelský manuál   Cisco XR 12000 Series User Manual, 148 stránky
15310-MA Uživatelský manuál     Cisco 15310-MA User Manual, 10 stránky
7100 Series Uživatelský manuál   Cisco 7100 Series User Manual, 24 stránky
12012 Uživatelský manuál   Cisco 12012 User Manual, 34 stránky
2600 Uživatelský manuál   Cisco 2600 User Manual, 32 stránky
3725 Uživatelský manuál   Cisco 3725 User Manual, 22 stránky
GigaStack WS-X3500-XL Uživatelský manuál   Cisco GigaStack WS-X3500-XL User Manual, 58 stránky
WRT320N Uživatelský manuál   Cisco WRT320N User Manual, 53 stránky
7200 VXR Uživatelský manuál   Cisco 7200 VXR User Manual, 64 stránky
1600 Uživatelský manuál   Cisco 1600 User Manual, 13 stránky
12406 Uživatelský manuál   Cisco 12406 User Manual, 36 stránky