Emerson S4K2UC Manual do Utilizador descarregar pdf (Página 6)

INTELLISLOT RELAY CARD USER MANUAL | 6

4.0 Jumper Setup

The IntelliSlot relay card has ve jumpers, P3 through P7, as shown in Figure 2. Each jumper connects two PINs.

Jumper

Front of card

Figure 3: Jumper location & numbering

By default, all ve jumpers have shunts installed. The two PINs are shunted together to provide the functions shown in Table 2,

allowing relay commons to be tied together.

NOTE: The jumpers should be removed if there are any external voltage sources that may intentionally or inadvertently be

connected to the relay. Removing the shunt from any two PINs breaks the connection between the relay commons so they

are not tied together.

Table 2: Jumper Connections

Jumper Relay

P6 On Battery

P5 UPS Fault

P4 Low Battery

P3 On Bypass

P7 Summary Alarm

1 2 3 4 5 6 7 8

Sem comentários

Emerson S4K2UC Manual do Utilizador Página 6