Emerson NetSure DCS 48375 Manual de Instruções Página 31

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 30
Installation and User Instructions UM584622100
Spec. Nos. 584622100, 584622200, 584622300, 584622400 (Model DCS48375) Issue AC, July 3, 2012
Chapter 5. Installing the Converter Modules and Initially Starting the System Page 25
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CHAPTER 5.
INSTALLING THE CONVERTER MODULES
AND INITIALLY STARTING THE SYSTEM
INSTALLING CONVERTER MODULES
The converter module is hot swappable. It can be installed with the system operating.
Warning: To prevent damage to the latching mechanism, ensure the handle is in
the open position when installing or removing a converter module.
NEVER hold the handle in the closed position when installing a
converter module into a shelf.
Procedure
1) Place the module into an unoccupied mounting slot without sliding it in
completely.
2) Loosen the captive screw on the module handle. Pull the handle to pivot it out of
the module front panel (this will also retract the latch mechanism located at the
right side of the module). Refer to Figure 5-1 for latch mechanism illustration.
3) Push the converter module completely into the shelf.
4) Push the handle into the front panel of the module. This will lock the module
securely to the shelf. Tighten the captive screw on the handle.
5) Repeat the above steps for each converter module being installed in the system.
6) After the converter modules are physically installed in the mounting shelf(s), they
are ready for operation immediately after power is supplied to them.
Screw
Note: Handle must be
open when installing
or removing module.
Handle in
Closed Position
Figure 5-1
Converter Module Handle/Latch Mechanism
Vista de página 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Comentários a estes Manuais

Sem comentários