Emerson SR5 Manual de Instruções

Type SR5D103099X012Instruction ManualForm 5786May 2010Figure 1. Type SR5!

Type SR510 Figure 6. Type SR5 Sanitary Regulator AssemblyNPS 2

Type SR511 Figure 7. Type SR5 Sanitary Regulator Assembly with Pressure Loade

Type SR5The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher

Type SR52NPS 1/2, 3/4, 1, 1-1/2, 2, and 3 (DN 15, 20, 25, 40, 40 x 25, 50, and 80)

Type SR53Table 2. Outlet Pressure Ranges and Control Spring Data

Type SR54Clean out all pipelines before installation of the regulator and check to be sure the regulator has not been damaged or collected

Type SR55To prevent valve plug closing, insert the CIP/SIP pin (key 30, Figure 4) completely so that spring

Type SR56 3. Remove body from the line to inspect the internal wetted parts.

Type SR57When ordering replacement parts, reference the key number of each needed part as found in the following parts list. Separate kits containing

Type SR58Figure 4. Type SR5 Sanitary Regulator AssemblyNPS 1/2 through 1-1/2 (DN 15 through 40)

Type SR59Figure 5. Type SR5 Sanitary Regulator Assembly with Pressure Loaded Spring CaseNPS 1/2 through 1-1/2 (DN 15 through 40)GE11040