Emerson turbine meter 1500 Manual de Instalação

Installation and operation manualPart Number 3-9008-504, rev. KOctober, 2013DanielTM Series 1500 turbine meter 3" thru 18" sizes

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERTABLE OF CONTENTSiiThis page intentionally left blank.

DANIEL™ SERIES 1500 TURBINE METER OCT 2013TABLE OF CONTENTS iiiFigures3-1 Typical Installation ... 3-

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERTABLE OF CONTENTSivThis page intentionally left blank.

DANIEL™ SERIES 1500 TURBINE METER OCT 2013INTRODUCTION 1-11.0 INTRODUCTION1.1 GeneralThis manual is designed to assist in the installation and operati

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERINTRODUCTION1-2This page intentionally left blank.

DANIEL™ SERIES 1500 TURBINE METER OCT 2013SPECIFICATIONS 2-12.0 SPECIFICATIONSThis meter is designed for use within the guidelines of API Standards, C

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERSPECIFICATIONS2-2INMETRO certification Certification numberand markingApplicable norms ABNT NBR IEC 60079-0:

DANIEL™ SERIES 1500 TURBINE METER OCT 2013Pressure/Temperature Carbon Steel Stainless SteelSPECIFICATIONS2-3600 ANSI / -20 to 100°F (-29° to 82°C)1480

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERSPECIFICATIONS2-4Meter Performance Linearity ± 0.15% (Linearity options of ± 0.1% and ± 0.07% available on c

DANIEL™ SERIES 1500 TURBINE METER OCT 2013SPECIFICATIONS 2-5Type: Square WaveFrequency Range: 0 to 5 kHzMax. Voltage: 30 VdcMax. Current: 125 mAMax. P

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERSPECIFICATIONS2-6This page intentionally left blank.

DANIEL™ SERIES 1500 TURBINE METER OCT 2013INSTALLATION 3-13.0 INSTALLATION3.1 GeneralThis section contains specific instructions for installation of t

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERINSTALLATION3-23.3 Installation and EquipmentFigure 3-1, Typical Installation, has been provided as a guide

DANIEL™ SERIES 1500 TURBINE METER OCT 2013INSTALLATION 3-3When installing this equipment, bolting must conform to the requirements of ASME B16.5paragr

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERINSTALLATION3-4MECHANICAL EQUIPMENT DAMAGEAlways use a flushing medium that is compatible with the metallurg

DANIEL™ SERIES 1500 TURBINE METER OCT 2013INSTALLATION 3-5C. Flow Conditioning PlateThe flow conditioning plate is available for all standard Series 1

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERINSTALLATION3-63.4 Pickoff Coils And Electrical ConnectionsA. Pickoff CoilsThe Series 1500 Turbine has the c

DANIEL™ SERIES 1500 TURBINE METER OCT 2013INSTALLATION 3-7Figure 3-2. UMB Wiring

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERINSTALLATION3-8This page intentionally left blank.

DANIEL™ SERIES 1500 TURBINE METER OCT 2013OPERATION 4-14.0 OPERATION4.1 GeneralThis section contains the operating procedures for the Series 1500 Turb

Safety signal words and symbolsPay special attention to the following signal words, safety alert symbols and statements: Safety alert symbol This is

OCT 2013 DANIEL™ SERIES 1500 TURBINE METEROPERATION4-24.3 OperationFlow and pressure information is stamped on the nameplate located on the outside of

DANIEL™ SERIES 1500 TURBINE METER OCT 2013MAINTENANCE 5-15.0 MAINTENANCEReference Figures 7-1 through 7-6 Exploded Parts Drawings.Item numbers referen

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERMAINTENANCE5-25.3 Disassembly Procedures - Internal ComponentsA. All sizes1. Before removing the meter from

DANIEL™ SERIES 1500 TURBINE METER OCT 2013MAINTENANCE 5-3Disassembly Step 1Remove the downstream shaft nut,simultaneously holding the upstream shaftnu

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERMAINTENANCE5-4Disassembly Step 3Remove downstream cone from the shaft.Thrust washer should remain in cone.Di

DANIEL™ SERIES 1500 TURBINE METER OCT 2013MAINTENANCE 5-5Disassembly Step 5Remove journal bearing.Disassembly Step 6Remove upstream cone from the shaf

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERMAINTENANCE5-6Disassembly Step 7Remove upstream hanger assembly fromthe opposite end.To do this you must ins

DANIEL™ SERIES 1500 TURBINE METER OCT 2013MAINTENANCE 5-75.4 Reassembly of Internal ComponentsIn all cases reassembly is the reverse of disassembly. C

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERMAINTENANCE5-85.5 Field Retrofitable Dual PickoffIn the event that a second pickoff is required for equipmen

DANIEL™ SERIES 1500 TURBINE METER OCT 2013TROUBLESHOOTING 6-16.0 TROUBLESHOOTING6.1 GeneralThis information has been provided as an aid in basic troub

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERTROUBLESHOOTING6-2This page intentionally left blank.

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-17.0 PARTS LISTThis section contains the necessary parts required to make up any standard unit

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-2Figure 7-1. UMB Assembly - All Sizes (Reference Table 7-1)**Torque 55 in. lbs. (16)

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-3Table 7-1. UMB Assembly (All Sizes) (Reference Figure 7-1)ItemNumberDescription Part Number Q

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-4Figure 7-2. High Temperature UMB Assembly (Reference Table 7-2)* Torque 55 in. lbs. (26)

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-5Table 7-2. High Temperature UMB Assembly (Reference Figure 7-2)ItemNumberDescription Part Num

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-6Figure 7-3. 3" through 18" Uni-Directional 1500 Series Turbine (Reference Table 7-3)

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-7Table 7-3. 3" through 8"Uni-Directional Series 1500 Turbine Meter(Reference Figure

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-8Figure 7-4. 4" through 8" Bi-Directional Series 1500 Series (Reference Table 7-4)

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-9Table 7-4. 4" through 8"Bi-Directional Series 1500 Turbine Meter(Reference Figure 7

Important safety instructionsDaniel Measurement and Control, Inc. (Daniel) designs, manufactures and tests products tofunction within specific conditi

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-10Figure 7-5. 10" through 12" Uni-Directional Series 1500 Series (Reference Table 7-5

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-11Table 7-5. 10" through 12"Uni-Directional Series 1500 Turbine Meter(Reference Figu

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-12Figure 7-6. 16" through 18" Uni-Directional Series 1500 Series (Reference Table 7-6)

DANIEL™ SERIES 1500 TURBINE METER OCT 2013PARTS LIST 7-13Table 7-6. 16" through 18"Uni-Directional Series 1500 Turbine Meter(Reference Figu

OCT 2013 DANIEL™ SERIES 1500 TURBINE METERPARTS LIST7-14This page intentionally left blank.

Daniel Measurement and Control, Inc.Returned Material AuthorizationRepair Form for Used EquipmentIncluding Decontamination/Cleaning StatementA Return

Shipping RequirementsFailure to comply with this procedure will result in the shipment being refused.1. Write the RMA number on the shipping package.2

NOTES

NOTES

Product operation personnel:• To prevent personal injury, personnel must follow all instructions of this manual prior to andduring operation of the p

Emerson Process ManagementDaniel Measurement and Control, Inc.11100 Brittmoore Park DriveHouston, TX 77041T+1 713-467-6000F+1 713-827-4805www.emerson.

NoticeTHE CONTENTS OF THIS PUBLICATION ARE PRESENTED FOR INFORMATIONAL PURPOSES ONLY,AND WHILE EVERY EFFORT HAS BEEN MADE TO ENSURE THEIR ACCURACY, TH

Warranty and limitation of liability1. LIMITED WARRANTY: Subject to the limitations contained in Section 2 herein, Daniel Measurement & Control,I

DANIEL™ SERIES 1500 TURBINE METER OCT 2013TABLE OF CONTENTS iTABLE OF CONTENTS1.0 INTRODUCTION .............. 1-