
Table of Contents
Page
CONTRACTOR:
How To Install a White-Rodgers ComfortPlus Steam Humidier ................. 3
Safety Precautions ................................................................................ 3
Tools & Materials Needed ..................................................................... 4
Selecting a Location .................................................................................... 4
Mounting the Humidier (Options A-C) ........................................................ 5
Plumbing and Setting the Water Level ........................................................ 8
How To Install the Programmable Automatic Flushing Timer .................... 10
To Reprogram the Automatic Flushing Timer .......................................11
How to Maintain a White-Rodgers Steam Humidier ................................ 12
Troubleshooting ......................................................................................... 14
Replacement Parts .................................................................................... 15
HOMEOWNER:
How Your Humidier Works ....................................................................... 17
How To Extend the Life of Your Humidier ................................................ 18
FAQs about IAQ ........................................................................................ 19
Contact Information ............................................................. 20 (Back Cover)
•
•
•
For the Contractor:
How To Install a White-Rodgers
ComfortPlus Steam Humidier
NOTES: This humidier must be installed by a qualied professional
contractor. Failure to comply with this requirement may nullify the
warranty.
Read all instructions before beginning installation of the humidier.
White-Rodgers assumes no responsibility under warranty if the contractor
and/or user do not follow these printed instructions.
FOR WIRING INSTRUCTIONS AND INSTALLATION OF THE ELEC-
TRONIC COMPENSATING HUMIDISTAT, PLEASE SEE SEPARATE
INSTRUCTIONS ENCLOSED IN THE HUMIDIFIER CARTON.
Safety Precautions
Do not install a humidier where the surrounding temperature may
exceed 200ºF.
CAUTION: Excessive heat will damage the humidier, possibly causing
an overow condition and water damage to the home.
Do not install a humidier where the surrounding temperature may be
32ºF or colder (e.g., attics, garages, etc.).
CAUTION: Freezing water will damage the humidier and burst the
supply pipe, resulting in damage to the home.
Do not cut or drill into any air conditioning components or electrical
enclosures during humidier installation.
DANGER: Electrocution is possible if you come in contact with a
live electrical wire. Blindness can occur if refrigerant contacts your
eyes.
When the humidier is installed in a nished basement or any area
where water damage could occur, be sure to connect the humidier’s
overow provision to a suitable drain.
For above-ceiling installations, install an additional drain pan plumbed
to a suitable drain.
Installation, wiring and plumbing of the humidier must comply with local
codes, ordinances and regulations.
1.
2.
3.
4.
5.
6.
Comentários a estes Manuais