Emerson 15-90kW Guia do Utilizador descarregar pdf (Página 12)

Installation

Liebert

IntelliSlot

™

Unity

™

Card 8

Figure 3 Change administrator and general user names and passwords

2.3 Configure the Card

The Liebert IntelliSlot Unity card requires minor configuration, such as choosing the IP/Web

communication interface, serial RS-485 communication interface, or both. The default for IP/Web

communication is IPv4, but this can be changed to IPv6 for greater security; contact your network

administrator to determine whether it is compatible with your network. To choose the communication

interface refer to Figure 4:

1. Select Unity Tab > Configuration > Network Settings.

2. Enable the protocol, either IPv4 or IPv6, that will be used to communicate with the Liebert

IntelliSlot Unity card and with the Liebert equipment.

a. Click on either IPv4 Settings or IPv6 Settings.

b. Click the Edit button.

c. When prompted with a login display, enter the user name and password (the defaults are

Liebert and Liebert).

d. Put a check mark (✔) in the enabled box.

e. Insert the desired or assigned IP address along with the rest of the required networking

information; contact your system administrator if necessary.

3. Click on Save to confirm the changes or click on Cancel to discard them. The changes will take

effect after the card is restarted.

Administrator User

Name and Password

General User Name

and Password

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Sem comentários

Emerson 15-90kW Guia do Utilizador Página 12