Emerson 15-90kW Guia do Utilizador descarregar pdf (Página 41)

Edit the Liebert IntelliSlot Unity Card Configuration

37 Liebert

IntelliSlot

™

Unity

™

Card

5.8 Protocols Folder—SNMP Subfolder

Folders and settings in this folder permit configuring the card for various types of SNMP

communication, including access, traps and other user settings.

SNMP Settings

• SNMPv3 Engine ID—The SNMPv3 engine ID; assigned automatically

• SNMP v1/v2c Enable—Enable or Disable SNMP v1/v2c

• SNMP v3 Enable—Enable or Disable SNMPv3

• Authentication Traps—An Authentication Trap is sent if an SNMP host tries to access the card

via SNMP, but either the host address is not in the SNMP Access Settings or it is using the wrong

Community String.

• Heartbeat Trap Interval—Enable or Disable and set interval 5 minutes, 30 minutes, 1 hour, 4

hours, 8 hours, 12 hours and 24 hours

• RFC-1628 MIB—Enable or Disable support for retrieval of data from the RFC-1628 MIB objects.

Required for proper operation of Liebert MultiLink

and applies only to managed UPS equipment

• RFC-1628 MIB Traps—Enable or Disable support for sending RFC-1628 traps. Required for

proper operation of Liebert MultiLink and applies only to managed UPS equipment

• Liebert Global Products (LGP) MIB—Enable or Disable support for getting and setting data using

the Liebert Global Products MIB.

• LGP MIB Traps—Enable or Disable support for Liebert Global Products MIB traps. LGP traps

will not be sent unless LGP MIB is enabled.

• LGP MIB System Notify Trap—Enable or Disable support for the LGP System Notification trap.

This is a single trap sent each time an alarm or warning is added or removed from the conditions

table. It provides a text description of the event in a varbind of the trap message. LGP System

Notify Traps will not be generated unless the LGP MIB is enabled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

Sem comentários

Emerson 15-90kW Guia do Utilizador Página 41