Emerson Fisher D & DA Manual de Instruções Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 12
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
Instruction Manual
D100386X012
DandDAValves
June 2014
2
Table 1. Specifications
Maximum I nlet Pressures and Temperatures
(1)
If the valve nameplate shows an ASME
pressure-temperature class, maximum inlet pressure
and temperature is consistent with applicable ASME
class per ASME B16.34.
If the nameplate does not show an ASME class, it will
show a maximum cold working pressure at 38_C
(100_F) (for example, 3600, 6000, 9000, or 10,000
psi)
Maximum Allowable Pressure Drops
(1)
Flow up: Capable of full rated pressure drops
Flow down: See table 2 for pressure drop limits for
ceramic trim
Shutoff Classification Per ANSI/FCI 70-2
and IEC 60534-4
Standard: Class IV
Optional: Class V
Maximum Service Temperature
232_C(450_F)
Flow Characteristic
Equal Percentage
Flow Direction
DValve:Flow up through t he seat ring and out past
the valve plug
DA Valve: Flow in either direction
Approximate Weight
DValve:34 kg (75 lbs)
DA Valve: 46 kg (100 lbs)
1. Do not exceed the pressure or temperature limits in this manual and any applicable standard limitations.
Specifications
Specifications for t hese valves are in table 1. Some of the specifications for a given valve appear on a nameplate, which
is attached to the valve actuator or wired to the valve assembly if the valve was purchased without an actuator.
Educational Services
For information on available courses for Fisher D and DA valves, as well as a variety of other products, contact:
Emerson Process Management
Educational Services - Registration
Phone: 1-641-754-3771 or 1-800-338-8158
http://www.emersonprocess.com/education
Table 2. Flow Down Pressure Drop Limits - Ceramic Trim Only
VALVE SIZE
NPS
SEAT RING DIAMETER, mm (INCHES)
6.4 (0.25) 9.5 (0.375) 12.7 (0.5) 19.1 (0.75) 25.4 (1) 31.8 (1.25)
Pressure Drop, bar
1 414 414 414 193 --- ---
2 689 689 689 462 262 165
Pressure Drop, psi
1 6000 6000 6000 2800 --- ---
2 10,000 10,000 10,000 6700 3800 2400
Vista de página 1
1 2 3 4 5 6 7 ... 11 12

Comentários a estes Manuais

Sem comentários