
Type ACE95JR
7
It is recommended that all seals and diaphragms be
replaced as a matter of good practice whenever a
valve is disassembled and re-assembled. Parts kits
are available through your local Sales Ofce.
When performing disassembly or re-assembly
operations, refer to Figure 6 for key numbers (unless
otherwise directed).
!
Actuator/Diaphragm Disassembly
1. Remove the actuator cap (key 1) and the spring
load by unthreading the adjusting screw (key 2).
See Figure 4.
2. Unthread the hex-head screws (key 29) and
remove the lock washers (key 28) and nuts
(key 31) from the upper and lower actuator cases
(keys 33 and 30). Refer to Figure 6.
3. Lift the upper actuator case (key 33) from the
lower actuator case (key 30).
4. If it is necessary to replace the gasket (key 9),
remove the spring case (key 7) and spring case
gasket from the upper actuator case (key 33).
Figure 5. Cage Assembly
W8162
W8161
Comentários a estes Manuais