Emerson ROC364 Manual de Instruções descarregar pdf (Página 122)

ROC364 Instruction Manual

B-17 Local Display Panel Rev Jun/05

B.3.7.4 Entering Plate Change Information

Select Plate Change from the AGA Menu Display to change the orifice plate size. After selecting, Plate

Change, the Enter Password display appears.

B.3.7.4.1 Entering a Password

Certain requests return the Password display shown in Figure B-27. The Password prompt appears as

four asterisks (*).



NOTE: Information describing how to set up Passwords is located in the appropriate ROCLINK

configuration user manual.

ENTER PASSWORD

****

INC NEXT ENTER ESC

Figure B-27. Plate Change Password Display

To change an asterisk to a Password character:

1. Press the INC (increase) key until the correct number appears.



NOTE: The value that is currently being edited appears with an underscore.

2. Once the correct number appears, press NEXT to move right to the next asterisk.

3. Press the INC (increase) key until the correct number appears.

4. Once the correct number appears, press NEXT to move right to the next asterisk.

5. Continue this procedure for each asterisk until all four Password numbers display.

6. Press ENTER to enter the Password.

If the Password is valid, a new display appears.

B.3.7.4.2 Changing the Plate Size

To change the Plate Size:

1. Select AGA from the Main Menu.

2. Select Plate Change from the AGA Display.

3. Enter your Password. Refer to Section B.3.7.4.1, Entering a Password, on page B-17.

4. Select the AGA point using PREV and NEXT and press ENTER. Press ESC to return to the

AGA Display. Refer to Figure B-28.

SELECT AGA

Meter ID Name

PREV NEXT ENTER ESC

Figure B-28. Select AGA Point Display

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 145 146

Sem comentários

Emerson ROC364 Manual de Instruções Página 122