
Product Data Sheet
00813-0100-4811, Rev DA
Catalog 2008 - 2009
Rosemount 3300 Series
Level-30
Code Process Connection - Size / Type (consult factory for other process connections)
JE DN100, PN160. HTHP / HP units
JF DN100, PN250. HTHP / HP units
KA DN150, PN16
JIS Flanges in 316L SST (EN 1.4404)
UA 50A, 10K
UB 50A, 20K
VA 80A, 10K
VB 80A, 20K
XA 100A, 10K
XB 100A, 20K
YA 150A, 10K
YB 150A, 20K
ZA 200A, 10K
ZB 200A, 20K
Threaded Connections Probe Type
RA 1 ½ in. NPT thread All
RB 1 in. NPT thread 3A, 3B, 4A, 5A, 5B, standard temperature and
pressure
SA 1 ½ in. BSP (G 1 ½ in.) thread All
SB 1 in. BSP (G 1 in.) thread 3A, 3B, 4A, 5A, 5B, standard temperature and
pressure
Proprietary Flanges. See “Replacing a Displacer in an Existing Displacer Cage” on page 12
TF Fisher - proprietary 316L SST (for 249B cages) Torque Tube Flange
(10)
TT Fisher - proprietary 316L SST (for 249C cages) Torque Tube Flange
(10)
TM Masoneilan - proprietary 316L SST Torque Tube Flange
(10)
(1) Requires external 8-30 V dc power supply.
(2) Process seal rating. Final rating depends on flange and O-ring selection. See “Tank Connection” on page 6.
(3) Requires option None for sealing (no O-ring). Only for SST (“Material of Construction”, code 1).
(4) For measurements on liquids only.
(5) For other materials, consult factory.
(6) Requires High Temperature High Pressure (code H) or High Pressure (code P) probe.
(7) Available with standard temperature and pressure (code S).
(8) Extra length for fastening is added in factory.
(9) Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending on selected probe length unit.
If tank height is unknown, please round up to an even length when ordering. Probes can be cut to exact length in field. Maximum allowable length is
determined by process conditions. See “Replacing a Displacer in an Existing Displacer Cage” on page 12 for more probe length guidance.
(10) For pressure and temperature rating, see page Level-6.
Comentários a estes Manuais