Emerson iPro SERIES Informações Técnicas descarregar pdf (Página 13)

Technical Information

D7.21.2/1011/E

13/17

5 CoreSense™ Diagnostics jumper settings

The last compressor in the daisy-chain must be “terminated” by moving the jumper from JP5 to JP3. For all other

compressors the jumper should remain in the default JP5 position.

JP4 should be set “1-2” if connected to an iPro rack controller. Set JP4 to “2-3” for other pack controllers.

Do not remove JP1. This is reserved for future use.

Figure 13

6 CoreSense™ Diagnostics DIP-Switch setting

Figure 14: CoreSense™ Diagnostics DIP-Switch setting

1 2 ... 8 9 10 11 12 13 14 15 16 17

Sem comentários

Emerson iPro SERIES Informações Técnicas Página 13