Emerson Fisher 4320 Manual de Instruções descarregar pdf (Página 53)

Instruction Manual

D103621X012

4320 Position Monitor

April 2014

D Reset/Restore

Last Reset Type—indicates the reason for the most recent device reset; used for troubleshooting.

Reset Device—the equivalent of a power cycle, and will cause the device to drop off the wireless network, affecting

communications for any neighbor devices that are passing packets through it. Only recommended when instructed by

service personnel.

Diagnostics / No Diagnostics—used by service personnel for troubleshooting.

Refresh—select to obtain the current values of Diagnostics and Last Reset Type.

Accessing Features

Trip Points and Deadband

The 4320 is shipped with a factory default setting of 10% for the Open Trip Point and 90% for the Closed Trip Point. The

Deadband is set at 5%.

Field Communicator

Select Online, Configure, Manual Setup, then Limit Switch Configuration to verify or make changes to the trip point

settings. Refer to the Configure menu tree shown in figure 25.

AMS Wireless Configurator or AMS Device Manager

Go to Configure, Manual Setup, then select Change Limit Switch Parameters from the Limit Switch tab to make changes

to the trip point settings. See figure 27.

Figure 27. Setting Trip Point in AMS Wireless Configurator and AMS Device Manager

MANUAL SETUP

LIMIT SWITCH TAB

CHANGE LIMIT

SWITCH PARAMETERS

CONFIGURE

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Sem comentários

Emerson Fisher 4320 Manual de Instruções Página 53