Emerson ROSEMOUNT 5300 Especificações descarregar pdf (Página 78)

Reference Manual

00809-0600-4026, Rev BA

December 2011

Rosemount Process Radar

6-2

INSTALLATION &

CONFIGURATION

Step 1. Complete the QIG Follow the instructions provided in Section 5: 5400 Quick Installation Guide.

Step 2. Basic

Configuration

Basic Configuration Parameters

• HART/FF Address and Device Tag

• Measurement Units

Figure 6-1. Tank Geometry

• Tank Height

• Tank Type and Tank Bottom Type

• Pipe Diameter if applicable

• Hold Off/Upper Null Zone

This parameter should only be changed if there are disturbing objects

close to the antenna, e.g. nozzle disturbances. No valid measurements

are possible above the Hold Off Distance.

• Process Conditions

For best performance, select only if applicable, and no more than two

options.

• Product Dielectric Range

• Volume Configuration, if needed

• Analog Output (HART)

Tank Height (R)

Product Level

Upper Reference Point

Lower Reference Point

(Level=0)

Transition Zone

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 105 106

Sem comentários

Emerson ROSEMOUNT 5300 Especificações Página 78